The next video presents João Carlos Precision Instruments: Fujifilm X-H1 and GFX 50S:
“X-Photographer João Carlos from Portugal makes use of the Fujifilm X-H1 and GFX 50S capturing bikes in an previous industrial manufacturing unit…“
Fujifilm lately introduced the firmware updates for the next cameras:


Fujifilm GFX 50S
- GFX 50S (Firmware Replace Ver. three.30; November 29, 2018),


Fujifilm X-T3: Black (left) and Silver (proper)
- X-T3 (Firmware Replace Ver. 2.00; To be obtainable in December 2018) and


Fujifilm X-H1
- X-H1 (Firmware Replace Ver. 2.00; To be out there in December 2018).
NEWS RELEASE
Contents
Fujifilm broadcasts firmware updates for FUJIFILM GFX 50S, FUJIFILM X-T3, and FUJIFILM X-H1
New features embrace the development of in-body picture stabilization efficiency for X-H1, 4K HDR video recording and simultaneous output of Movie Simulation / F-Log footage for X-T3, and 35mm format mode for GFX 50S
November, 13, 2018
Up to date: November, 27, 2018
We want to amend a few of firmware updates that we introduced on November, 13, 2018.
Firmware Model:
FUJIFILM X-T3 (Ver. 2.00)
Slower shutter speeds than the framerate could be chosen with 4K 29.97P/25P/24P/23.98P. The setting can’t be utilized when you choose Lengthy GOP with DCI4K/4K or FHD. Please seek advice from the “Movie Recording Mode” chart under for extra particulars.
Film Recording mode
* Not suitable with DCI4K.
** Codec and bit fee shall be modified will depend on the recorder.
*** Can’t select slower shutter velocity than framerate
Firmware Model:
FUJIFILM X-H1 (Ver. 2.00)
So as for the in-body picture stabilization and optical picture stabilization to work collectively when utilizing the XF80mmF2.Eight R LM OIS WR Macro, the lens should even have new firmware utilized (Ver. 1.11). The brand new firmware shall be launched concurrently the X-H1 firmware model 2.00 (December 2018).
NEWS RELEASE
Fujifilm pronounces firmware updates for FUJIFILM GFX 50S, FUJIFILM X-T3, and FUJIFILM X-H1
New features embrace the development of in-body picture stabilization efficiency for X-H1, 4K HDR video recording and simultaneous output of Movie Simulation / F-Log footage for X-T3, and 35mm format mode for GFX 50S
November 13, 2018
FUJIFILM Company (President: Kenji Sukeno) will launch new firmware updates for the FUJIFILM GFX 50S (“GFX 50S”), FUJIFILM X-T3 (“X-T3”), and FUJIFILM X-H1 (“X-H1”) X Collection digital cameras in November and December.
Firmware Model:
[ FUJIFILM GFX 50S Ver. 3.30 : November, 29, 2018 ]Please obtain from the hyperlink under.
- GFX 50S Digital camera Physique Firmware Replace: http://www.fujifilm.com/support/digital_cameras/software/firmware/gfx/gfx50s/index.html
- Helps “35mm Format Mode” when utilizing GF Lens and H mount adapter
“35mm Format Mode” crops the middle of the sensor 36.0mm x 24.0mm (30.5M) and data JPEG and RAW file. - Improved eye-sensor response
Lowered the time to modify between EVF and LCD when you choose “eye-sensor” on the viewfinder show settings. - Helps simultaneous delete for RAW and JPEG information
When RAW / JPEG is chosen within the card slot setting (for nonetheless picture), RAW/JPEG picture could be deleted concurrently. By choosing “OFF”, solely the RAW picture shall be deleted. - Helps EVF and LCD colour adjustment
Colour of EVF/LCD is adjustable from display setting menu.
Firmware Model:
[ FUJIFILM X-T3 Ver. 2.00 : December 2018 ]
- 4K HDR video recording in Hybrid Log Gamma (HLG)
Helps 4K HDR video recording within the Hybrid Log Gamma (HLG), one of many codecs outlined within the ITU-R BT.2100 worldwide requirements *Four. It permits the seize of wealthy and lifelike photographs in a scene the place there’s a large hole between spotlight and shadow, or topics with excessive shade saturation.
*Four Solely suitable with H.265(HEVC). Please take pleasure in with tv or show suitable with HLG codecs.
- Simultaneous output of Movie Simulation and F-Log footage*5
Helps simultaneous output of Movie Simulation and F-Log footage. It permits you to document in F-Log whereas checking Movie Simulation picture on an exterior monitor.
*5 Not suitable with 59.94P/50P, FHD excessive velocity rec., 4K interframe NR, and HDMI output information show mode.
Additionally, can’t select totally different picture measurement (4K/FHD) for HDMI output and inner SD card recording. - Recording over 4GB film file as one file
Film information are not cut up when the file reaches 4GB file measurement. The file is recorded as one file offering an SD reminiscence card higher than 32GB is used (excludes 32GB) *6.
*6 Through the use of SD reminiscence playing cards lower than or equal to 32GB, film recording will proceed with out
interruption when the file measurement reaches 4GB, nevertheless subsequent footage might be recorded to a separate file. - Show colour temperature (Kelvin) on EVF/LCD
Shade temperature (Kelvin) might be displayed on EVF/LCD. - Helps slower shutter speeds with DCI4K/4K 29.97P/25P/24P/23.98P *7
Slower shutter speeds than the framerate might be chosen with 4K 29.97P/25P/24P/23.98P.
*7 Can’t choose slower shutter velocity than framerate with DCI/4K 59.94P/50P or DCI4K/4K/FHD LongGOP recording.
- Suitable with ALL-Intra and most bitrate 400Mbps with H.264
Utilizing H.264 compression, you’ll now to have the ability to choose ALL-Intra at a most bitrate of 400Mbps. - Show energy provide icon
Energy provide icon is displayed on EVF/LCD whereas utilizing AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD *Eight and Anker PowerCore Velocity 20000 PD *9
*Eight Anker and PowerCore are trademark or registered trademark of Anker Improvements Restricted or related corporations.
*9 Product will not be obtainable in your nation.
Firmware Model:
[ FUJIFILM X-H1 Ver. 2.00 : December 2018 ]
- In-body picture stabilization and optical picture stabilization now work collectively to enhance general stability
With an XF or XC optical picture stabilized lens, in-body picture stabilization labored with three axis (up and down / optical axis rotation). The remaining 2 axis (proper and left pitch, yaw angle) was managed by optical picture stabilization within the lens. This firmware has a brand new picture stabilization algorithm to permit the in-body picture stabilization to work in all 5 axis and to realize greater than five-stops (as much as the equal of 5.5 stops *10 ) picture stabilization by cooperative management in accordance with the kinds of frequency and blur quantity.
To activate this perform, lenses are essential to be up to date to newest firmware model (new firmware model 1.11 solely for XF80mmF2.Eight R LM OIS WR Macro) . Please examine the newest firmware model from the hyperlink under.
- Listing of Firmware for Interchangeable Lens: http://www.fujifilm.com/support/digital_cameras/software/fw_table.html#interchangeable_lens
*10 Based mostly on CIPA requirements. When utilizing XF10-24mmF4 R OIS, XF18-55mmF2.Eight-Four R LM OIS, and XC16-50mmF3.5-5.6 OIS II.
Product identify | Suitable firmware model |
---|---|
XF80mmF2.Eight R LM OIS WR Macro | Ver. 1.11 or later (will probably be launched on Dec. 2018) |
XF200mmF2 R LM OIS WR | Ver. 1.00 or later |
XF10-24mmF4 R OIS | Ver. 1.12 or later |
XF18-55mmF2.Eight-Four R LM OIS | Ver. three.22 or later |
XF18-135mmF3.5-5.6 R LM OIS WR | Ver. 1.11 or later |
XF50-140mmF2.Eight R LM OIS WR | Ver. 1.30 or later |
XF55-200mmF3.5-Four.Eight R LM OIS | Ver. 1.20 or later |
XF100-400mmF4.5-5.6 R LM OIS WR | Ver. 1.20 or later |
XC15-45mmF3.5-5.6 OIS PZ | Ver. 1.02 or later |
XC16-50mmF3.5-5.6 OIS II | Ver. 1.11 or later |
XC50-230mmF4.5-6.7 OIS II | Ver. 1.10 or later |
Product identify | X-H1 firmware | |
---|---|---|
Ver. 1.12 | Ver. 2.00 | |
XF80mmF2.Eight R LM OIS WR Macro | 5.zero stops | 5.zero stops |
XF200mmF2 R LM OIS WR | 5.zero stops | 5.zero stops |
XF10-24mmF4 R OIS | three.zero stops | 5.5 stops |
XF18-55mmF2.Eight-Four R LM OIS | three.5 stops | 5.5 stops |
XF18-135mmF3.5-5.6 R LM OIS WR | 5.zero stops | 5.zero stops |
XF50-140mmF2.Eight R LM OIS WR | 5.zero stops | 5.zero stops |
XF55-200mmF3.5-Four.Eight R LM OIS | 5.zero stops | 5.zero stops |
XF100-400mmF4.5-5.6 R LM OIS WR | 5.zero stops | 5.zero stops |
XC15-45mmF3.5-5.6 OIS PZ | three.zero stops | 5.zero stops |
XC16-50mmF3.5-5.6 OIS II *11 | three.zero stops | 5.5 stops |
XC50-230mmF4.5-6.7 OIS II *11 | three.5 stops | 5.zero stops |
*11 Not suitable with XC16-50mmF3.5-5.6 OIS and XC50-230mmF4.5-6.7 OIS.
2. Improved in-body picture stabilization efficiency
Get rid of picture shake when panning slowly when film recording or on the reside view picture.
three. Recording over 4GB film file as one file
Film information are not cut up when the file reaches 4GB file measurement. The file is recorded as one file offering an SD reminiscence card larger than 32GB is used (excludes 32GB) *12 .
*12 Through the use of SD reminiscence playing cards lower than or equal to 32GB, film recording will proceed with out
interruption when the file measurement reaches 4GB, nevertheless subsequent footage can be recorded to a separate file.
Four. Show shade temperature (Kelvin) on EVF/LCD
Shade temperature (Kelvin) could be displayed on EVF/LCD.
5. Show energy provide icon
Energy provide icon is displayed on EVF/LCD whereas utilizing AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD *13 and Anker PowerCore Velocity 20000 PD *14.
*13 Anker and PowerCore are trademark or registered trademark of Anker Improvements Restricted or related corporations.
*14 Product will not be out there in your nation.
For inquiries on info on this media launch, contact:
- Buyer Contact:
- Please contact your nearest Fujifilm workplace.
For info on Fujifilm subsidiaries and distributors, please entry the next
http://www.fujifilm.com/worldwide/
The next video presents Xtra Turbo X-T3 with Daniel Tengs / FUJIFILM:
“Norwegian X-Photographer Daniel Tengs shoots motocross and skateboarding on X-T3.
Filmed on X-T3.”
Please help this website. Purchase the above Fujifilm Cameras in addition to Lenses and Equipment from our Trusted Sponsor B&H Photograph-Video, the Skilled’s Supply, satisfying hundreds of thousands of consumers for over 35 years (costs are in USD):